Detroit Radiant Products Company LS3 Series - Manual (Page 4)

WARNING
!
4
LS3 Series
NEUTRAL EARTH
HOT
- 120V HEATER INPUT -
120V
1.0 Introduction • Safety Signs and Labels
Safety Signs and Labels
Product safety signs or labels should be replaced by the product user when they no longer are legible.
Contact either your local distributor or the product manufacturer for obtaining replacement signs or labels.
Read and understand all safety information and warnings in this manual before
installation, operation and maintenance of the radiant tube heater system.
SER
VICE ACCESS
P ANEL
CONTROLS & GAS V
AL VE COMP
ARTMENT
1. Disconnect gas & electricity
.
2. Remove four (4) thumbscrews. 3. Remove top cover
.
4. Swing hinged panel downward. KEEP
COVER IN PLACE. REMOVE FOR SER
VICE ONL
Y . SER
VICE ACCESS
P ANEL
F AN COMP
ARTMENT
1. Disconnect gas & electricity
.
2. Remove top cover (2 thumbscrews). 3. Remove tsix (6) 1/4” screws. 4. Lift and remove panel. KEEP
COVER IN PLACE. REMOVE FOR SER
VICE ONL
Y .
Top Panel
F/N: LLTCL006L/C/R
Clearance to Combustibles Label
Bottom Panel
F/N: LLLOGO1 Logo Label
3
F/N: LLAC023
Combustion Air
Connector Label
F/N: LLTB018 (NG)
F/N: LLTB019 (LP)
NEUTRAL
EARTH
HOT
- 120V HEATER INPUT -
120V
F/N: LLV3EP1
F/N: LLV3EP6
Back Panel