Multichannel Systems STG1000 Manual - Manual (Page 39)

33
7 Stimulus Display
7.1 Selecting Channels
To enlarge the display size of the channels, we suggest that you show only those channels you are
currently working with.
Note: This will affect only the display . It has no effect on the download of signals. To select or
deselect channels for downloading, click the Download Channel check boxes in the main
window of the program.
• Clear the check box of all channels that are not in use.
All channels that are not selected are removed from the display.
7.2 Display Tools
• Several tools are provided to optimize the graphical presentation of the stimuli. If you later
choose to display channels, the axes of the new displays are set to the default values.
• The time axis can display only positive values.
• The y-axis of the Sync Out channels cannot be adjusted, because only values of 0 and 1 are
available for these channels.
Enable
scrolling Scroll the axes by clicking and dragging with your mouse.
Enable
scaling Zoom the axes by clicking and dragging with your mouse.
Zoom out Reduces the time scale.
Zoom in Magnifies the time scale.
Reset Resets the axes of all channels to the default values.
Size to fit Adjusts the ranges to fit the largest displayed stimulus.
Show
measure
tool A horizontal bar is shown that displays the current/voltage and the time
value of the intersection point. Drag the bar with the mouse.