Multichannel Systems STG1000 Manual - Manual (Page 17)

11
5 Programming Stimulus Protocols
5.1 MC_Stimulus Worksheet
You can freely combine any pulse types. Use a separate row for each pulse type.
Hint: Several tools are provided for editing whole columns at once or autocreating entries.
1. Select the desired output type first. Click either Voltage or Current under Output Mode on
the file window of MC_Stimulus.
2. Click a tab to select an output channel.
The according channel worksheet is brought to front.
3. Now you can enter the pulses into the worksheet. Select a Pulse type (either rectangular, ramp,
or sine).
4. Enter the desired voltage steps and a time length for each step.
The according pulse is displayed in the WYSIWYG display at once.