Multichannel Systems STG1000 Manual - Manual (Page 16)

Stimulus Generator 1000 Series User Manual
10
SWEEP Lights green if stimulus file has been downloaded to STG. STG is now ready to use.
Lights orange when stimulation is running, that is, output channels are active.
4.2 Operating Multiple STGs
If you have more than one STG connected to the same computer, you can choose which STG you
like to control from the currently active MC_Stimulus program.
• The serial port of the currently active STG is displayed on the status bar of the currently active
instance of the MC_Stimulus program.
• Click Port Settings and then select the serial port to which the
selected STG is connected.
• You can open multiple instances of the MC_Stimulus program
and control multiple STGs at the same time. Please make sure
that you control each STG only by one MC_Stimulus instance.
• You can also open only one MC_Stimulus instance and control
multiple STGs one after the other by the same instance. Simply
change the Port Settings and select the next STG when you
have finished to program the first. The STGs can be operated
without a computer connection.