Aiwa CSD-NS1 - Manual (Page 11)

En
To prevent accidental erasure
Break off the plastic tabs on the cassette tape with a
screwdriver or other pointed tool after recording.
To record on the tape again
Cover the tab openings with adhesive tape, etc.
Tab for side A
Side A
RECORDING
1
Load a tape with the side to be recorded
on facing up and the exposed side facing
forward.
2
Press TAPE/REV MODE to select the
reverse mode.
: Records on one side only.
or : Records on both sides. Check that
x is displayed, so as to start recording from the
side facing up.
3
Get ready to record from the source.
To record from a CD, press CD and load the disc.
To record from a radio broadcast, press TUNER/
BAND and tune to a station.
4
Press w REC/REC MUTE to start
recording.
“REC” flashes on the display.
When the selected function is CD, CD play and
recording starts simultaneously.
To record only the selected tracks of a CD
1 Follow steps 1 to 3 of PROGRAMMED PLAY on
page 9 to program tracks.
2 Press w .
To stop recording, press s . To stop CD play, press it
again.
To pause recording (only when the source is TUNER) ,
press a . To resume, press it again.
To erase recording, press TAPE/REV MODE and
press w .
After recording, press POWER 6 STANDBY/ON to
turn the power off.
ENGLISH
11
To insert blank spaces
When recording from the radio, 4-second blank spaces
can be inserted. These spaces are useful to locate the
desired portion on the tape when playing back on other
units with the “Music Sensor” function.
1 Press w REC/REC MUTE in recording or recording
pause mode.
“REC” indicator flashes quickly and the tape runs
without recording for 4 seconds, then pauses.
2 Press a to resume recording.
To make blank spaces less than 4 seconds, press a
while “REC” flashes quickly.
To make blank spaces more than 4 seconds, press
w again after the tape pauses.
a PAUSE
c PLAY
s STOP
r , t