Flank keys, Select mode – MIDLAND CT 200_400 User Manual

Page 8

DTMF Code

In.Channel/Frequency.mode,.press.

PTT and digit a number on the keypad.

Flank keys

PTT: push.to.transmit.and.release.

it.to.receive

MONI:. push. it. to. monitor. the.

frequency.in.use

Select Mode

Hold down

and turn on the power: the radio can switch between the Channel

and.Frequency.mode..Repeat.the.procedure.to.pass.to.the.other.mode..
In. Frequency. mode,. press.

. to. switch. between. the. Frequency. mode. and.

Channel+Frequency.mode.

To store a frequency

To store a frequency and its settings (CTCSS,DCS, SHIFT REPEATERS etc)

follow the procedure below:

1. at first, choose all the settings to store,
2..press.the.

.button,.

3..then,.push.

4. rotate the

Encoder knob and select the memory number where you want to

store.the.frequency.and.its.settings..

5. confirm your selection by pressing

(

note: a.triangle.displayed.underneath.the.channel.number.indicates.that.it.has.

already been stored).

PTT + CALL: push. to. enable. a.

1750Hz tone