MIDLAND CT 200_400 - Manual (Page 16)

E
N
G
L
IS
H
6
time out
transmission
TOT? 12 OFF-270 SAME AS ABOVE
type of scanning SCANS?13 TO/CO/SE
Turn.encoder.to.select.Press.
to confirm
Press.twice. .to.exit
voice function
activation
VOICE?14 ON/OFF
Turn.encoder.to.select.
Press. to confirm
.Press. .to.exit
shift repeater DIFFR? 15 0-70.995
Input.frequency.or.turn.encoder.
Press. to confirm
Press. .to.exit
ctcss/dcs rx/tx C-CDC? 16 See.CTCSS.chart SAME AS ABOVE
ctcss/dcs only rx R-CDC? 17 See.CTCSS.chart
Turn Encoder to select
Press. to confirm
ctcss/dcs only rx T-CDC? 18 See.CTCSS.chart SAME AS ABOVE
.
+ / - shift S-d? 19 +/-/cancel
Turn.encoder.to.select
Press. to confirm
Press. .to.exit
frequency step
selection
STEP? 20
5k/10k/6.25k/
12.5k/25k
SAME AS ABOVE
wide/narrow band
selection
N/W ? 21
Wide
Narrow
SAME AS ABOVE
Exit VFO/MR
Note:.parts.from.6.to.2.are.available.only.in.Frequency.mode.
In.Channel.mode.only.parts.from..to.5.are.active.
To.pass.rapidly.from.Frequency.to.Channel.mode.or.vice.versa,.switch.on.the.unit.
and.hold.down.the. .button.
NAME ON/OFF
Turn.encoder.to.select.
Press. to confirm
Press. .to.exit