MIDLAND CT 200_400 - Manual (Page 11)

E
N
G
L
IS
H
use the fast menu: press the key and then . and.
follow.the.procedure.above.described.starting.from.point.3.
Scrambler on/off
To activate the scrambler, follow this procedure:
..press.the. .button;
2..turn. the. Encoder knob until ‘SCRM’ (menu 06) is
displayed
3..push. ;
4. turn the Encoder knob and activate/deactivate the scrambler
(ON = activated; OFF = deactivated);
5..press. ;
6..press.twice.the. knob to exit.
To.activate/deactivate.rapidly.this.function,.you.can.also.use.
the fast menu: press the
key and then .and.follow.
the.procedure.above.described.starting.from.point.3.
Backlight on/off
To select the LCD backlight:
..press.the.
.button;
2..turn.the. Encoder knob until ‘LED’ (menu 07) is displayed
3..push. ;
4. turn the Encoder knob and activate/deactivate the function:
3 different options are available (AUTO, ON, OFF);
5..press. ;
6..press.twice.the. knob to exit.
To activate/deactivate rapidly the backlight, you can also use
the fast menu: press the
key and then .and.follow.
the.procedure.above.described.starting.from.point.3.
Select the backlight colour
To select the backlight colour:
..press.the.
.button;
2..turn. the. Encoder knob until ‘LIGHT’ (menu 08) is
displayed
3..push. ;
4. turn the Encoder knob and choose the desired colour (3
different colours are available);
5..press. ;
6..press.twice.the. knob to exit.
To select it rapidly, you can also use the fast menu: press