MIDLAND CT 200_400 - Manual (Page 10)

E
N
G
L
IS
H
0
Advanced Operations
Selecting the VOX sensitivity level
The VOX function is deactivated by default. To activate it follow
the procedure here below:
..press.the.
.button;
2..turn.the. Encoder knob until the display shows ‘VOX’ (menu
03);
3..push.the. key;
4. turn again the Encoder knob and select the desired VOX
level (you can choose amongst 9 different levels);
5..push.the. key again;
6..to.exit,.press.twice. .
To activate and select rapidly the VOX function, you can do
it also by operating on the fast menu: press the
key and
then. .and.follow.the.procedure.above.described.starting.
from.point.3..
Setting the transmission power
To select the desired power level:
..press.the.
.button;
2..turn.the. Encoder knob until ‘POW’ (menu 04) is displayed
3..push. ;
4. turn the Encoder knob and select the desired power level
(you can choose between 2 levels: ‘H’.ed.‘L’);
5..press. ;
6..press.twice.the. knob to exit.
To.activate.and.select.rapidly.the.power.level,.you.can.also.
use the fast menu: press the
key and then . and.
follow.the.procedure.above.described.starting.from.point.3..
Setting squelch
To select the squelch level:
..press.the.
.button;
2..turn.the. Encoder knob until ‘SQL’ (menu 05) is displayed
3..push. ;
4. turn the Encoder knob and select the desired squelch level
(9 different levels are available);
5..press. ;
6..press.twice.the. knob to exit.
To.activate.and.select.rapidly.the.squelch.level,.you.can.also.