MIDLAND Alan 42 multi - Manual (Page 10)

10
CONTENT
› 1 portable CB transceiver
› wall charger for 8 penlight battery pack
› empty pack for 6 penlight AA type alkaline batteries
› empty pack for 8 penlight AA type rechargeable batteries with charge jack
› car adapter with SO 239 external antenna jack
› scratch proof case
› antenna
› belt clip
› wrist band
FUNCTION AND LOCATION OF THE CONTROLS
1. Antenna connector: insert into this plug the antenna supplied with the
radio. It is possible to use external vehicular antennas to obtain a better
performance.
2. Squelch Control: this control cancels the background noise of the receiver. By
turning the knob to the right the function is activated, by turning the knob to
the left the function is deactivated. The knob should be regulated exactly at
the point where the receiver background noise disappears.
3. On/Off Volume Control.
In ‘’off’’ position your transceiver is off. Turn this control clockwise to switch on
the unit. Turn the knob clockwise a little more to set the audio level, until you
get a comfortable reception.
4. MIC jack: connect by inserting the loudspeaker mike to the plug.
5. External loudspeaker jack: connect by inserting the loudspeaker mike to the
plug.
6. Belt clip