Mobi Technologies 70208 DXR Touch - Manual (Page 7)

5
PAIRING: The monitor and camera are paired (wirelessly linked) by the manufacturer at the fac-
tory. If you ever need to relink the camera, or you want to pair Additional Cameras (sold separately)
you need to pair each following this sequence:
NOTE: Before pairing be sure the camera and monitor are both turned on and both are
within 10 feet of each other.
1
. Power On the Monitor and Camera
2
. Press and hold the Pair Button on the back of the Monitor until the Pair Screen is displayed,
then release the button.
3
. Press and release the Pair Button on the Monitor and select a camera number (1-4) to be
paired. The word “Pairing” appears below the icon of the selected camera as it waits to be
paired.
4
. You have 10 seconds to press and hold the Pair Button on the back of the Camera to com-
plete Pairing, otherwise restart from step 2 above.
5.
The word “OK” or “Failed” will be displayed on screen.
6.
Press the ESC Button or the Return icon to go back. To pair additional cameras repeat
the steps above.