Mobi Technologies 70208 DXR Touch - Manual (Page 20)

18
AUDIO/VIDEO OUT
You can hear and see audio/video output on a TV or other AV device
directly from your DXR Touch monitor.
Simply connect the AV OUT Cord (included) to the AV OUT jack on the right side of the monitor
and connect the other ends (three RCA connectors) to the Audio and Video Input jacks on your TV,
DVR, or Camcorder, and select the appropriate input setting on that AV device.
The monitor screen will automatically turn off, signaling the unit is connected. Please refer to your
AV device manual for proper input selection and operation.
TROUBLESHOOTING
Problem Solution
Monitor will not turn on • Check AC/DC connection
• Confirm power outlet is working properly
• Charge Battery Pack
Monitor on but no picture • Confirm “Audio Only” mode is not selected
• Confirm “VOX” mode is OFF
• Confirm there are no obstructions in front of camera
• Confirm camera and monitor are paired properly
Camera will not turn on • Check AC/DC connection
• Confirm power outlet is working properly
Battery does not recharge • Check AC/DC connection.
• Check battery pack connection in the monitor.
• Confirm power outlet is working properly
• Confirm batteries are placed correctly in monitor
Connection is lost • Confirm monitor and camera are ON.
• Confirm AC/DC adapter is connected properly
• Confirm battery has sufficiant power.
• Place camera and monitor near each other and press
camera Pair button to relink camera and monitor.
• Reduce distance between camera and monitor.
• Remove or avoid other wireless products that may
be near camera or monitor.