English, 6 pc health status, Reset case open status – AMD GA-M51GM-S2G User Manual
Page 44: Case opened, Current system/cpu temperature, Current system/cpu fan speed (rpm), Cpu warning temperature, Cpu/sysem fan fail warning, Cpu smart fan control
GA-M51GM-S2G Motherboard
- 44 -
English
2-6
PC Health Status
Reset Case Open Status
Disabled
Don't reset case open status. (Default value)
Enabled
Clear case open status at next boot.
Case Opened
If the case is closed, Case Opened will show "No."
If the case is opened, Case Opened will show "Yes."
If you want to reset Case Opened value, enable Reset Case Open Status and save the change
to CMOS, and then your computer will restart.
Current Voltage(V) VCORE / DDR18V / +3.3V / +12V
Detect system's voltage status automatically.
Current System/CPU Temperature
Detect system/CPU temperature automatically.
Current System/CPU FAN Speed (RPM)
Detect system/CPU fan speed status automatically.
CPU Warning Temperature
60
o
C / 140
o
F
Monitor CPU temperature at 60
o
C / 140
o
F.
70
o
C / 158
o
F
Monitor CPU temperature at 70
o
C / 158
o
F.
80
o
C / 176
o
F
Monitor CPU temperature at 80
o
C / 176
o
F.
90
o
C / 194
o
F
Monitor CPU temperature at 90
o
C / 194
o
F.
Disabled
Disable this function. (Default value)
CPU/SYSEM FAN Fail Warning
Disabled
Fan warning function disable. (Default value)
Enabled
Fan warning function enable.
CPU Smart FAN Control
(Note)
Disabled
Disable this function.
Enabled
When this function is enabled, CPU fan will run at different speed depending
on CPU temperature. Users can adjust the fan speed with Easy Tune
based on their requirements. (Default value)
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
PC Health Status
Reset Case Open Status
[Disabled]
Case Opened
NO
Vcore
OK
DDR18V
OK
+3.3V
OK
+12V
OK
Current System Temperature
39
o
C
Current CPU Temperature
49
o
C
Current CPU FAN Speed
3183 RPM
Current System FAN Speed
0 RPM
CPU Warning Temperature
[Disabled]
CPU FAN Fail Warning
[Disabled]
SYSTEM FAN Fail Warning
[Disabled]
CPU Smart FAN Control
[Enabled]
CPU Smart FAN Mode
[Auto]
System Smart FAN Control
[Disabled]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F7: Optimized Defaults
Item Help
Menu Level`