AMD GA-M51GM-S2G - Manual (Page 36)

GA-M51GM-S2G Motherboard - 36 -
English
Password Check
System The system can not boot and can not access to Setup page will be
denied if the correct password is not entered at the prompt.
Setup The system will boot, but access to Setup will be denied if the correct
password is not entered at the prompt. (Default value)
HDD S.M.A.R.T. Capability
This feature allows your hard disk to report read/write errors and to issue warnings when third-
party hardware monitor utility is installed.
Enabled Enabled HDD S.M.A.R.T. capability.
Disabled Disabled HDD S.M.A.R.T. capability.(Default value)
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you
install a PCI card and a PCI Express VGA card on the motherboard.
PCI Slot Set Init Display First to PCI VGA card.
Onboard VGA Set Init Display First to onboard VGA.
PEG Set Init Display First to PCI Express VGA card.(Default value)
Frame Buffer Size
16MB Set On-chip frame buffer size to 16MB.
32MB Set On-chip frame buffer size to 32MB.
64MB Set On-chip frame buffer size to 64MB.(Default value)
128MB Set On-chip frame buffer size to 128MB.
Disabled Disable this function.
Onboard GPU
Enable If No Ext PEG Output from the onboard GPU when no PCI Express VGA card is
installed. (Default value)
Always Enable Always output from the onboard GPU.