Mirion Technologies M340 BedBug III User Manual
Page 2
315 Daniel Zenker Drive
200 IST Center
Horseheads, NY 14845
USA
T +1.607.562.4369
+1.800.432.1478
F +1.607.562.4392
12954 Stonecreek Drive
Pickerington, OH 43147
USA
T +1.614.367.2050
F +614.367.2464
2 Columbus Drive
Southwood Business Park
Farnborough, Hampshire,
GU14 0NZ
GU34 2PZ, UK
T +44.(0).1252.375.137
F +44.(0).1252.391.890
Kaiser-Konrad-Str 93a
D 53225 Bonn
Deutschland
T +49.(0).228.625.088
F +49 (0) 228.626.300
www.mirion.com
SPECIFICATIONS AND PERFORMANCE
© Copyright 2012. All rights reserved for trademark and registered trademark
information. Quadtek® is a registered trademark of Mirion Technologies Corporation.
The above specifications may vary according to system configuration.
Mirion Technologies Incorporated reserves the right to amend or change the
information on this sheet without prior warning. 2/12
CAMERA
Power Requirements
100/115/230 VAC, 50/60 Hz,24 Watts
Camera
Solid state IR sensor
Signal to Noise
55 db or higher
Video Output
Monochrome EIA Standard RS-
170, 525 lines or CCIR, 625 lines,
composite video output and sync;
1.0 to 1.4V p-p
Pyrometer Detector
/OP option: Solid state 1.6 micron
detector 629 to 1482°C (1165 to
2700°F), multiplexed with video.
Requires M702 processor
LENS
Construction
Air-cooled 304 stainless steel outer
shroud. Sapphire window for max.
environmental protection
Lengths
Standard:
/L24: L = 540mm (21.25”)
/L48: L = 1149mm (45.25”)
Field of View
90° horizontal, 60° vertical,
Diameter
1.5” (38mm
Optical Filter
Particulate-penetrating proprietary
infrared filter
Cooling Requirements
Instrument-quality air*, 7-10 dm
3
s
-1
@ 35-70 kPa (15-20 SCFM
@ 5-10 psig typical)
*Air quality to ISO 8573-1,
Class1•7•2
CAMERA
Construction
Corrosion-resistant nylon cover;
anodized aluminum body; NEMA 4,
dust and waterproof
Cooling Type
Vortex cooled; instrument-quality air;
13 dm
3
s
-1
@ 690kPa (25 SCFM @ 100
psig typical)
Ambient Environment
0° to 60°C (32° to 140°F) operating
temperature
MECHANICAL
Focus Adjustment
Optical focus adjustment screw
located on back of enclosure
Video Output Jack
Female PL-259 “UHF” type
Power Input Jack
Removable waterproof miniplug (JOY
type TP, female 3-conductor; mating
power cord provided)
Enclosure Cooling Input
1/4” brass quick-disconnect nipple;
mating coupler (Snaptite BVHC4-4F)
provided
Lens Cooling Input
1/2” brass quick-disconnect nipple;
mating coupler (Snaptite BVHC8-8F)
provided