Mirion Technologies DBR-2 - Manual

health physics
A Mirion Technologies Division
¡ ¢ £ ¤ ¥ ¦ § ¨ ©
DBR-2 DIS Dosimeter Reader
Passive Dosimetry
FEATURES
stand-alone use or interface to WinELD Dose •
Management Software
display of Session and Assignment doses and •
Session dose reset capability
EIA RS-232C serial or optional external 10Base-T •
Ethernet LAN interface
back-up batteries and internal buff er memory for •
off -line dose collection
portable table top design •
PTB approved confi guration avilable •
DBR-2
DIS Dosimeter Reader
The DBR-2 Dosimeter Reader is designed to read
DIS-1, DIS-1H3 and EDIS-1 dosimeters assembled in
the DDH snap-in dosimeter holders. The dosimeter
is simply inserted into the reader head slot for dose
read-outs. The design of the slot prevents the dosim-
eter from being inserted incorrectly.
Just plug the DIS-1, DIS-1H3 or EDIS-1 dosimeter into
the Dosimeter Reader and in a couple of
seconds the Hp(10), Hp(0.07), Hp(3) or H*(10) doses
are shown on the display and stored in a local
buff er memory. The instant reading capability
allows the user to control his/her dose on a daily
basis and makes the monthly or quarterly change
of the dosimeter unnecessary.
The control period can be indefi nite (in excess of
a year), because the dose readings can be
transmitted via electronic method rather than physi-
cally sending the dosimeter away for reading and
recording of offi cial doses.