Mirion Technologies GMP-25 Pancake Beta Probe User Manual
N e w, Health physics
health physics
A Mirion Technologies Division
Featuring:
GMP-25 External Beta Probe
Portable Survey Meters
FEATURES
• remote pulse rate measurements
• for alpha /beta/gamma surface contamination mea-
surements
• converts the meter into contamination monitor
• sensitive for low levels of alpha, beta and gamma
radiation
• for general contamination and frisking
• cord lengths up to 15 meters upon request
GMP-25
External Beta Probe
The GMP-25 represents the new design of Mirion
handheld equipment fl eet. This external probe
enhances the detection capability of RADOS RDS-31
meter family.
It has been designed to fulfi ll the most demanding
applications in nuclear industry, HLS & civil defence
and industrial use.
The GMP-25 probe is intended for monitoring
alpha, beta, gamma and X-ray radiation. The GMP-
25 is used as an external detector with the RDS-31/
iTx/iTxSD multi-purpose Radiation Survey Meters
especially for surface contamination monitoring and
source localization applications.
The GMP-25 probe is equipped with a Binder con-
nector and connected to the mating bulk connec-
tor interface at the bottom of RDS-31 family survey
meters.
Like other RADOS external probes, also the GMP-25
is a ” smart” probe, having an internal high voltage
generator and non-volatile memory for calibration
coeffi
cients and probe identifi cation data. Thus the
probe can be connected “on-the-fl y” without the
need for switching off the meter, which automati-
cally recognizes the probe type and sets the meter
reading to defi ned measuring unit.
Whenever an external detector is connected to the
RDS-31, the meter performs continuous dose rate
measurements with internal detector, even if an
external probe is connected to the meter, to ensure
the safety of the user.
N E W