Mirion Technologies GMP-15-3 Beta Probes User Manual
Health physics
health physics
A Mirion Technologies Division
¡
¢
£
¤
¥
¦
§
¨
©
GMP-11-3 & GMP-15-3 External Probes
for RDS-31S/R Survey Meter
FEATURES
complete range of smart probes to enhance the
•
detection capabilities of the RADOS RDS-31S/R survey
meters
remote pulse rate measurements
•
converts the meter into contamination monitor
•
sensitive for low levels of alpha, beta and gamma
•
radiation
for general contamination and frisking
•
optional telescopic rod
•
cord lengths up to 15 meters upon request
•
GMP-11-3 & GMP-15-3
External Probes for RDS-31S/R survey meter
These external probes enhance the detection
capability of the RADOS RDS-31 survey meter .They
have been designed to fulfi ll both the civil defense
and industrial applications requirements.
The GMP-11-3/15-3 probes are intended for
monitoring alpha, beta, gamma and X-ray
radiation. The GMP-11-3/15-3 is used as
external probe for the RDS-31S/R Multi-Purpose
Survey Meter . The GMP-11-3/15-3 probe is con-
nected to an external binder connector interface at
the bottom of the RDS-31.
The probe can be attached to or removed off the
meter without any need to switch off the meter fi rst.
The RDS-31 automatically recognizes the connected
external probe type and switches to corresponding
display unit.
If the RDS-31 meter is switched off when the probe
is connected to it, the probe is detected by the me-
ter at the start-up when the meter is switched on.
The probes can be used as hand-held or as fi xed
probes.