Mirion Technologies M353 Pneumatic Automatic Retract System - Manual

IST-QUADTEK ® M353 RETRAcT
Pneumatic Automatic Retract System
imaging systems
A Mirion Technologies Division
Featuring:
FEATURES
• Retract monitors pressure and flow for camera
lens cooling. Pulls camera out of high heat if
levels fall below preset values.
• Operator override allows manual retraction for
inspection and cleaning.
• Multiple retraction lengths allow complete re-
moval from boiler, kiln or furnace.
• Remote control/monitoring versions available.
The IST-Quadtek high temperature imaging camera systems
are cooled by air or water. If the plant supply of air pres-
sure, water or electricity is interrupted the M353 Pneumatic
Automatic Retract System will retract the camera from the
most severe heat, protecting it from serious damage. With
the camera retracted from the intense heat the operator has
time to arrive at the location and manually pull the lens clear
of the viewport. Then they can track the coolant problem and
re-install the camera. The M353 works with the IST-Quadtek
Bedbug, Lynx and Spyrometer cameras, as well as cameras
of many other manufacturers.