Mirion Technologies RTM860TS - Manual (Page 2)

www.mirion.com
Format A4
Health Physics
Division
Since norms, specifications and designs are subject to occasional change, please ask for confirmation of the information given in this publication.
© Copyright 2008, All rights reserved. For trademark and registered trademark information. The copyright in this work is the exclusive property of Mirion Technologies (RADOS)
GmbH and is protected under the laws of Germany and other countries worldwide.
Mirion Technologies (MGPI) Inc
5000 Highlands Parkway
Suite 150
Smyrna Georgia 30082
USA
T +1.770.432.2744
F +1.770.432.9179 Mirion Technologies (MGPI) SA
Lieu-Dit Calès
Route d‘Eyguières
F-13113 Lamanon
France
T +33 (0) 4 90 59 59 59
F +33 (0) 4 90 59 55 18 Mirion Technologies
(RADOS) Oy
P.O. Box 506
FIN-20101 Turku
Finland
T +358 2 4684 600
F +358 2 4684 601 Mirion Technologies
(RADOS) GmbH
Ruhrstrasse 49
D-22761 Hamburg
Germany
T +49 40 85193 0
F +49 40 85193 256 Mirion Technologies Shanghai Branch
Room 801, 78 Jiangchang
San Lu, Zhabei District
Shanghai 200436
China
T +86 21 6180 6920
F +86 21 6180 6924
7NUC_RTM860_Y015-027E_4_FL
Overview of Features Comprehensive body coverage with alpha/beta detectors
• gas flow proportional detectors for alpha and beta contamination either simultaneously detected
or discriminated (as option)
• class leading homogeneity of detector response by minimized dead zones
• patented split delta geometry for uniform sensitivity profile
• up to 67 available measurement channels in total allow a variety of detector options
(e.g. small items boxes or gamma detectors)
• various choices in protective grids offer opportunity to optimize either for sensitivity or for detector
protection
Modern, PC supported measurement electronics
• real time, multitasking operating system QNX
• graphical user interface, calibration tool, various optional applications (P 2 accelerator, detector test etc.)
• voice guidance in two dozen languages
• various interfaces (USB, LAN, CD)
Designed for performance in nuclear environments
• design conform to new IEC 61098
• stainless steel housing, easily decontaminated, easy maintenance
Proven measurement concept
• automatic correction of background reduction
• automatic adjustment of measurement time
• display of measurement values with nuclide pre-selection (cps, dpm, cpm, Bq, nCi, Bq/cm 2 , kBq/m 2 )
Large choice of options: doors, barriers, small item boxes, card readers, dosimetry reader interface
Customer Benefits Quick and easy operation with robust performance
• software on the basis of the real-time QNX operating system proven in many industrial applications
• optional P 2 accelerator reduces measurement time up to 30 %
Designed for low cost of operation and easy maintenance
• maintenance software tools common over the CheckPoint:Body™ family of monitors
• quick flushing system as standard allows restart of system after repair of punctured detectors
within minutes
Ability to network
• TCP/IP ability
• optional link up with CeMoSys™ server for centralised monitoring
references The RTM860TS monitor of the CheckPoint:Body™ family is the ideal monitor to control the exit points
from controlled areas in nuclear facilities with:
• potential alpha and beta contamination (gamma as option)
• high throughput requirements
RADOS RTM860TS
Whole Body Contamination Monitor
CheckPoint:Body™ family