Meriam M130 T_C Thermocouple Calibrator User Manual

Page 13

M130 – T/C Calibrator

Instruction Manual Z1017-IR

E.O. 6566 Sept. 2008

www.meriam.com

Page 13 of 21

engineering units are K

TC TYPE

Select T/C type or mV

engineering units are mV only

engineering units are temperature only

URV

Upper Range Value for T/C and unit selected,

press enter & use +/ – keys

LRV

Lower Range Value for T/C and unit selected,

press enter & use +/ – keys

UP TIME

Select desired ramp time from LRV to URV,

press enter & use +/ – keys

DN TIME

Select desired ramp time from URV to LRV,

press enter & use +/ – keys

DELAY

Select desired start delay time for test,

press enter & use +/ – keys

A.RAMP 2

same as A.RAMP 1 above

A. RAMP 3

same as A.RAMP 1 above

Note:

1. Main and submenus are continuous, scrolling menus. Use W or X
to scroll through the menus.
2. Use SETUP key to discontinue simulation activity.