Meriam M130 T_C Thermocouple Calibrator - Manual (Page 10)

M130 – T/C Calibrator Instruction Manual Z1017-IR
E.O. 6566 Sept. 2008
www.meriam.com
Page 10 of 21
MEAS SETUP: Measure Mode Setup menu structure
T/C TYPE select ENTER to access submenus
mV engineering units are mV
B engineering units are temperature only
E engineering units are temperature only
J engineering units are temperature only
K engineering units are temperature only
N engineering units are temperature only
R engineering units are temperature only
S engineering units are temperature only
T engineering units are temperature only
OFF TMR select ENTER to access submenus
30 MIN shuts off in 30 min without new key stroke
OFF must use ON/OFF key to shut off
F RECAL select ENTER to access submenu
ZERO set zero. See “Zeroing the M130” section
VIEW view previously recorded values
RECORD select ENTER to access submenus
MANUAL press ENTER button to record values
AUTO values automatically recorded every 5 seconds
Note: Main and submenus are continuous scrolling menus. Use W or X to
scroll through the menus.