Meriam M130 T_C Thermocouple Calibrator User Manual

Page 11

M130 – T/C Calibrator

Instruction Manual Z1017-IR

E.O. 6566 Sept. 2008

www.meriam.com

Page 11 of 21

SIM (MANUAL) SETUP: Simulation Mode’s Manual menu structure

VALUE

ADJUST

Press ENTER & use increment or decrement group

keys to set a numeric value, press ENTER to start
UNITS

Select desired unit of simulation

engineering units are ºC

engineering units are ºF

engineering units are ºR

engineering units are K

TC TYPE

Select T/C type or mV

engineering units are mV

engineering units are temperature only

0 – 100

Outputs 0% and 100% of setup

START

Starts 0% of range; ENTER toggles to 100%, 0%...

UNITS

Edit units corresponding to 0 – 100, same as above

TC TYPE

Select T/C type, same as above

URV

Upper Range Value for T/C and unit selected

press enter & use +/ – keys

LRV

Lower Range Value for T/C and unit selected

press enter & use +/ – keys

STEP 25%

Outputs 0, 25, 50, 75 and 100% of setup below

START

Starts 0%, ENTER increases 25% to 100% & back

UNITS

Edit unit for STEP 25%, same as above

Select T/C type, same as above

URV

Upper Range Value for T/C and unit selected

press enter & use +/ – keys

LRV

Lower Range Value for T/C and unit selected

press enter & use +/ – keys

Notes: 1. Main and submenus are continuous, scrolling menus. Use W or X

to scroll through the menus.
2. Use SETUP key to discontinue simulation activity.