Adaptec SAS/SATA/SCSI RAID Controllers - Manual (Page 110)

Index ●
110
Q
QAS setting 84
R
RAID 16 , 17
non-redundant arrays 70
RAID 0 70
RAID 1 71
RAID 10 72
RAID 1E 16 , 71
RAID 5 73
RAID 50 75
RAID 5EE 16 , 74
RAID 6 16 , 76
RAID 60 17 , 76
RAID controllers. See controllers
RAID levels
26
record mode 89
recovering from disk drive failure 59
Red Hat
driver installation 51
OS installation 44
Redundant Array of Independent Disks. See RAID
Removable Media Devices Boot Support setting
82
replacing failed disk drives 59
requirements 14
drive 27
rescanning disk drives 80
resetting controllers 61
Runtime BIOS setting 82
S
safety information 104
SAS
4-wide ports 65
backplane connections 34 , 66
cables 28
comparison to parallel SCSI 68
connectors 65
description 63
direct-attach connections 33 , 66
disk drive identifiers 66
disk drives 27
edge expanders 67
end devices 63
expander connections 67
expander devices 63
fanout expanders 67
link speed 63
links 64
narrow connectors 65
narrow ports 65
phys 64
ports 64 , 65
SAS address 65
SAS cards 63
SAS devices 63
SAS domain 67
terminology 63
transceivers 64
wide connectors 65
wide ports 65
SAS Address setting 83
SAS controllers
cables 28
connecting disk drives 33
CRC Checking setting 83
disk drives 27
modifying with -Select utilities 83
Phy Rate setting 83
SAS Address setting 83
SAS devices 63
SATA
cables 29
disk drives 27
SATA controllers
cables 29
connecting disk drives 35
disk drives 27
modifying with -Select utilities 83
Write Cache setting 83
SATASelect 81
scripts in ACU for DOS 95
SCSI
cables 29
comparison to SAS 68
disk drives 27
SCSI controllers
cables 29
connecting disk drives 35
Controller SCSI Channel ID setting 84
Controller SCSI Channel Termination setting 84
disk drives 27
Enable Disconnection setting 84
Initiate Wide Negotiation setting 84
Maximum Transfer Rate setting 84
modifying with -Select utilities 84
Packetized setting 84
QAS setting 84
SCSI Parity Checking setting 84
SCSI Parity Checking setting 84