Adaptec SAS/SATA/SCSI RAID Controllers - Manual (Page 108)

Index ●
108
C
cables 28
cards. See controllers
CD-ROM Boot Support setting
82
command line interface (flash utility) 100
command line utility 56
contents of controller kit 14
Controller SCSI Channel ID setting 84
Controller SCSI Channel Termination setting 84
controllers
Alarm Control setting 82
Array Background Consistency Check setting 82
Array-based BBS Support setting 82
array-level features 16
Automatic Failover setting 82
BBS Support setting 82
cables 28
CD-ROM Boot Support setting 82
connecting external devices 35
data protection 16
descriptions 15 to 24
disk drives 27
Drive’s Write Cache setting 82
enhanced features 17
event log 85
figures 15 to 24
firmware 98
flashing 61
installation options 30
installing 32
keyed features 17
modifying general settings 82
modifying settings with -Select utilities 81
Physical Drives Display During POST setting 82
RAID levels 26
Removable Media Devices Boot Support setting 82
resetting 61
Runtime BIOS setting 82
setting boot controller 38
specifications 105
standard features
troubleshooting
59
updating firmware 98
upgrading firmware 17
copyback 16
CRC Checking setting 83
customer support 3
D
direct-attach connections 33 , 66
disk drives 27
cables 28
connecting to SAS controllers 33
connecting to SATA controllers 35
connecting to SCSI controllers 35
external 35
failure recovery
multiple arrays 60
multiple disk drives 61
RAID 0 arrays 60
with hot spare 60
without hot spare 60
formatting 85
HVD 27
initializing 80
LVD 27
recovering from failure 59
rescanning 80
SAS identifiers 66
SE 27
secure erasing 81
stopping a secure erase 81
verifying 85
drive requirements 27
Drive’s Write Cache setting 82
driver and operating system installation 30 , 42 , 48
driver disk 43
driver installation 49 to 53 , ?? to 54
drivers
installing on FreeBSD 53
installing on Linux 51
installing on NetWare 51
installing on OpenServer 52
installing on Solaris 52
installing on UnixWare 53
installing on VMWare 53
installing on Windows 51
installing with FreeBSD 47
installing with Linux 44 , 45
installing with NetWare 45
installing with OpenServer 46
installing with UnixWare 47
installing with VMWare 47
installing with Windows 44
E
electrostatic discharge 104
Enable Disconnection setting 84
end devices 63
End property 91
enhanced features 17