MAX ER-1500 USA - Manual (Page 8)

- 7 -
DISPLAY LAYOUT
(A) The symbol appears during setting mode.
(B) The symbol appears during the period of Daylight Saving Time.
USING THE MACHINE
CAUTION
Install this instrument on a level place.
Do not install on or near a place subject to vibration.
1. AUTOMATIC
OPERATION
ER-1500 shifts the column for printing automatically in the order of IN1, OUT1, IN2 and
OUT2 without the user pressing any external keys.
1. Insert time card to the position where automatic feed starts.
2. Time card will be ejected automatically after printing the time.
2. MANUAL OPERATION
ER-1500 allows manual operation for shifting the column to be printed on.
1. Select a desired column to print on the time card by pressing “IN1,”
“OUT1,” “IN2” or “OUT2” key.
2. The symbol appears at the selected column on the display.
3. Insert time card to the position where automatic feed starts.
4. Time card will be ejected automatically after printing the time.
1. Do not keep holding the time card during printing.
2. Do not pull or push time card with your hand.
3. Do not cover any of the small holes at both edges on time card.
1. If “E-01” appears on the display, the time card has been
inserted incorrectly. (See [13] on page 21)
2. When using Daily Total Time from MODE 1, ER-1500 automatically
prints the Total Time in the 5
th
column after printing the time in the
4
th
column.