MAX ER-1500 USA - Manual (Page 15)

- 14 -
SETTING LINE SHIFT TIME, IN/OUT AND DAYLIGHT
SAVING TIME (MODE 3)
Procedure
1. Insert the “Key-Card.” The symbol appears on the display to indicate the setting
mode.
2. Press the “IN2” key. The symbol appears at “MODE 3” on the display.
3. Press the or key to change each item.
4. Press the “SET” key after changing each item. The display moves to next item in the
order of Line Shift Time, IN/OUT, Overtime Start Time (OST) and Daylight Saving Time.
When the “SET” key is pressed at the end, the buzzer beeps twice and the display
returns to the start of the setting mode.
If “C-05” is displayed, press the “SET” key. (See [14] on page 21)
1. The time is displayed in only 24-hour format.
2. Initial data is displayed by pressing the “Clear” key.
[The start of setting mode] [Line Shift Time] [IN1] [OUT1] [IN2]
[OUT2]
[Overtime Start Time
(OST)]
[Starting date of
Daylight Saving Time]
[Ending date of
Daylight Saving Time] [The start of setting mode]
Items (MODE 3) Initial data Contents of setting Code No.
LST 3 : 00 Line Shift Time (Day change time) 01
IN 1 - - : - - Working start time (IN 1) 02
OUT 1 - - : - - Working end time (OUT 1) 03
IN 2 - - : - - Working start time (IN 2) 04
OUT 2 - - : - - Working end time (OUT 2) 05
OST - - : - - Starting time of Overtime Work 06
Daylight Saving Time Start - - : - - Starting date of Daylight Saving Time 07
Daylight Saving Time End - - : - - Ending date of Daylight Saving Time 08