MAX ER-1500 USA User Manual
Page 14
- 13 -
SETTING YEAR, MONTH, DATE, HOUR, AND MINUTE
(MODE 2)
Procedure
1. Insert the “Key-Card.” The symbol appears on the display to indicate the setting mode.
2. Press
the
“OUT1”
key. The
symbol appears at “MODE 2” on the display.
3. Press
the or
key to change the Year, Month, Date, Hour and Minute.
4. Press
the
“SET” key after changing each item. When the “SET” key is pressed at the end,
the buzzer beeps twice and the display returns to the start of the setting mode.
If “C-05” is displayed, press the “SET” key. (See [14] on page 21.)
[The start of setting mode]
[Year]
[Month/Date]
[Hour/Minute]
[The start of setting mode]
[Example] 1:35 (PM), 21st October, 2002
Procedure [MODE 2]
Display
Press the “OUT1” key.
Current Year is shown on the display.
Press the “SET” key to register the Year.
Press the
or
key until the display shows “10” for October.
Press the “SET” key to register the Month.
Press the
or
key until the display shows “21.”
Press the “SET” key to register the Date.
Press the
or
key until the display shows “13.”
Press the “SET” key to register the Hour.
Press the
or
key until the display shows “35.”
Press the “SET” key to register the Minute.
The display returns to the start of setting mode.
1. The
symbol appears during Daylight Saving Time when it has been set.
2. In Europe, set Date first and Month second.
3. The clock starts at “00” seconds when the “SET” key is pressed at the end.