MAX ER-1500 USA User Manual
Page 17
- 16 -
2. Setting Daylight Saving Time
After setting “Starting time of Overtime work,” the display moves to “Starting Date of Daylight
Saving Time.”
When setting the last week of the month, set “L” for the last week even if the last
week is the 4th week.
[Example] Starting Date of Daylight Saving Time : Sunday of the last week in March.
Ending Date of Daylight Saving Time : Sunday of the last week in October.
Procedure [MODE 3]
Display
After setting “Starting time of Overtime Work,” the display moves to
“Starting Date of Daylight Saving Time.”
Press the
or
key until the display shows “3” for March.
Press the “SET” key to register the Month.
Press the
or
key until the display shows “L” for the Last
week.
Press the “SET” key to register the Week.
Move the cursor to the position of “SUN” for the day of the week by
pressing the
or
key.
Press the “SET” key to register the day of the week.
Press the
or
key until the display shows “10” for October.
Press the “SET” key to register the Month.
Press the
or
key until the display shows “L” for the Last
week.
Press the “SET” key to register the Week.
Move the cursor to the position of “SUN” for the day of the week by
pressing the
or
key.
Press the “SET” key to register the day of the week.
1. During the period of Daylight Saving Time, the
symbol appears on the
display.
2. Once set, Daylight Saving Time will be adjusted automatically from the following
year, in accordance with the set data.
Setting the day
of the week
(Position for the month) (Position for the week) (Code No.)