MAX ER-1500 USA - Manual (Page 21)

- 20 -
ERROR CODES
Error codes Problem Solution
Time card is not inserted far
enough to where automatic feed
activates.
Insert time card to where automatic feed
starts.
Time card is inserted on the
wrong side.
Insert time card on the other side.
ER-1500 cannot read holes on
time card correctly. Check if any holes are covered.
Check if time card is bent or damaged.
● 4 printings have been already
completed in a day.
● Improper print was made by
manual operation.
150 or 50 time cards have been
already inserted in a day/month. (ER-1500 can handle up to 150 or 50 time
cards a day/month.)
When setting ER-1500, invalid
value is input. Input correct value.
Automatic feed does not carry
time card smoothly. Do not hold time card during printing.
Check if time card is bent or damaged.
Printer malfunction. Try to get normal printout by disconnecting
or connecting the power cord.
CAUTION CODE
Caution Code Problem Solution
When you try to revise Machine
Mode, Pay Closing Date, Date,
LST, 60/100 scale or Daily Total
Time, all time data is deleted. If you press “SET” key
All time data is deleted and the
revised data is registered.
If you press “CANCEL” key
The revision is canceled without
deleting time data.