MAX RB217 - Manual (Page 30)

30
Assembling
• Assemble the fixed cutter so that the large hole
is set to the rear side and the small hole is set
to the top side.
4. Insert the step pin into the hole and then
into the connecting rod hole.
5. Make sure that arm B is securely assem-
bled and tighten the 2 (plated) hexagon
socket head bolts M3
× 5. (Tightening
torque: 15.2lbF·inch (172cN·m))
• The (right) bolt should have the captive wash-
er. Install the washer first and then tighten the
bolt.
Fixed cutter
Small hole
Cutter
Large hole
CAUTION
Rear side Top side
step pin Loose insertion
of the pin
Hexagon socket head bolt M3
× 5 (plated)
Washer 3
× 7
CAUTION