MAX HN75 User Manual
Page 11
DRIVING DEPTH ADJUSTMENT DIAL
WARNING:
ALWAYS disconnect air supply before adjustment dial.
With air pressure set, drive nails into a representative material
sample to determine if adjustment is necessary.
If adjustment is required, disconnect air supply.
Refer to the mark on the Adjust Spacer for direction to turn the
adjustment dial.
Reconnect air supply.
TRIGGER LOCK MECHANISM
The tool is equipped with a Trigger Lock Mechanism. Push and rotate
the Trigger LOCK to the Trigger UNLOCK position before driving
nails.
CONTACT TIP
WARNING:
ALWAYS disconnect air supply before attaching / detaching the
contact tip.
Attach the Contact Tip on the tip of Contact Arm, when driving nails to
a soft material.
The Contact Tip can be kept on the Arm Cover when not using.
!
Deeper
Shallow
Trigger
Adjustment Dial
Adjust Spacer
Deeper Shallow
Trigger lock dial
Arm Cover
Contact Arm
Contact Tlip
!
13