MAX HN65J - Manual (Page 11)

13
5. MAINTAIN FOR
X DO NOT FIRE EN IT IS EMPTY
Y USE RECOMM
n
e let with the
jet oiler. (Recomm
Z INSPECT AND M EFORE OPERATION
WARNING:
Disconnect air ply and empty the magazine when inspecting or
maintaining the tool.
(1) Drain air line
(2) Keep lubrica
(3) Clean filter el
(4) Tighten all sc
(5) Keep contact arm moving smoothly
6. STORING
X When not in use for an extended period, apply a thin coat of the lubricant to the
steel parts to avoid rust.
Y Do not store the tool in a cold weather environment. Keep the tool in a warm
Keep out
ing or replacement of parts
use.
7. TROUBLE SHOO
The troubleshooting an airs shall be carried out only by the MAX CO.,
LTD.authorised distributors or by other specialists.
PERFORMANCE
THE NAILER WH
ENDED OIL
turbine oil should be used to lubricate the tool. Upo The velocite or
completion of op rations, place 2 or 3 drops of oil into the air plug in
ended Oil : ISO VG32)
AINTAIN DAILY OR B
!
sup
filter and compressor
tor filled in air 3-pieces set
ement of air 3-pieces set
rews
area.
Z When not in use, the tool should be stored in a warm and dry place.
of reach of children.
[ All quality tools will eventually require servic
because of wear from the normal
TING/REPAIRS
d/or rep
13