MAX TA551A/16-11 - Manual (Page 13)

ENGLISH
13
Trigger lock
dial
Trigger
(LOCK)
(UNLOCK)
TRIGGER LOCK MECHANISM
The tool is equipped with a trigger lock
mechanism. Push and rotate the trigger LOCK to
the trigger UNLOCK position before driving
staples.
CLEARING JAMMED STAPLES
ALWAYS disconnect air supply before
clearing jammed fastener.
Staple removal lever
q Take out the staples from the inside of the
magazine.
w Release the staple removal lever and open the
door.
e Remove staples that are jammed inside the
nose by using a punch or slotted screw driver.
r After removing the staples. Close the door and
the staple removal lever.
WARNING