beautypg.com

Mallory Ignition Mallory E-SPARK BREAKERLESS CONVERSION KIT 61010M_61011M User Manual

Page 4

background image

MALLORY IGNITION

550 MALLORY WAY, CARSON CITY, NV 89701

4

Step 10
Insert the rubber plug into the existing grommet hole
(Figure 12). This is a tight fit and you may need to pull
it through. Once it is in position, cut the bushing off
flush on the inside (Figure 13).

Step 11
Install the wire grommet. Lubricate the wires with light
oil. Run the wires through the grommet and out of the
distributor housing (see Figure 14).

FIGURE 11

FIGURE 12

FIGURE 13

FIGURE 14

Grommet

E-SPARK Plate
Assembly

Connector