Magnum Venus Plastech CB-6000-GT Glass Monitor - Manual (Page 24)

CB-6000-GT Material Monitor Manual
Rev. 10/2012 Page | 24
If special relay is installed - for Set Point
6 – SPt Setpoint (alarm) Parameters SP – 1 settings
Display Description Factory Setting MVP Setting
Lit – 1 Annunciators nor
Out – 1 Output Logic nor
SUP – 1 Power Up State off
Act – 1 Action off tOUt
ASn – 1 Assigment A Cnt
SP – 1 Setpoint Value 100 Enter signal out value
tOUt – 1 Setpoint Time Out 1.00 2.00
AUtO – 1 Auto Reset Action no 2ErOAE
rSd -1 Reset with Display no yes
(All other parameters remain as set by the factory)
QUICK REFERENCE:
or
PAR
Pro
F1
6 -SPt PAR
F2