beautypg.com

Magnum Venus Plastech Pro Series 11:1 PRO PUMP VPRO-45110 User Manual

Page 23

background image

23



Install Pro Pump:

1. Remove the pump from the vise and install on the unit with hex cap screws

(F-HB-05C-12).

2. Connect all hoses to the pump.

Set The Packing Set:

1. Prime the Pro pump fluid section.

2. Close the gun-head.

3. SLOWLY increase the pump pressure to 60 psi.

4. Keep the pump stalled for 5 to 15 minutes to allow the packing set to set.

5. Decrease the pump pressure to the desired operating pressure. Now you are ready

to connect, prime and pressurize the catalyst pump for operation.