Magnum Venus Plastech PRESSURE LIMIT VALVE PLV-1000 - Manual (Page 23)

MAINTAINENCE AND REPAIR MANUAL
PLV-1000
MAGNUM VENUS PLASTECH REV 1.00
APRIL 2010 PAGE 23
Install a new O-ring on to the Poppet Stem and insert the Poppet Stem into the Valve Body. Make sure
the Poppet Stem moves freely in the Valve Body.
FIG 4.3
Place 1-2 drops of thread lock on the Piston Body threads then using the correct Allen wrench, install the
Poppet nut. (FIG 4.4)
FIG 4.4
Install O-ring, onto the Valve Body assembly, Insert Spring and Spring Retainer and replace the
Spring Housing. (FIG 4.5)
FIG 4.5