beautypg.com

Chapter 5-assembly, Valve body assembly – Magnum Venus Plastech PRESSURE LIMIT VALVE PLV-1000 User Manual

Page 22

background image


MAINTAINENCE AND REPAIR MANUAL

PLV-1000

MAGNUM VENUS PLASTECH

REV 1.00

APRIL 2010

PAGE 22

CHAPTER 5-Assembly


Assembly of the PLV-1000 is opposite the disassembly procedure above. Having a clean and organized
work area is helpful.

VALVE BODY ASSEMBLY

Place the Needle guide and the (2) Seal Assemblies into the Valve body. Using the ¼” dowel, tap the
Needle Guide and Seal Assemblies into the Valve Body. (FIG 4.1)

FIG 4.1


Install the Seal Retainer and the Retaining Ring, making sure the Retaining ring is seated into the groove
in the Valve Body.

FIG 4.2