beautypg.com

Magnum Venus Plastech PATRIOT 1:1 ADHESIVE SYSTEM User Manual

Page 27

background image

Patriot 1:1 Adhesive System Operations Manual

Rev. 09/2012

Page | 27

4.

Turn Air Lift control lever to “up” position (see figure 20).








Figure 20










5.

Adjust pressure regulator marked Air Life to 20 psi

6.

Hold pail down if it beings to lift, close and open the Air Lift lever intermittently to raise follower and
pump out of pail.


7.

It may be necessary to adjust both ram / Air Lift and ram extraction pressures accordingly to
necessitate removal without lifting the pail.

8.

After pump and follower are removed, inspect, seal and dispose of protector gasket

9.

Clean any build up of material on follower gasket as well as follower plate

10.

Replace with “new” pails and refer back to procedures for priming.