Magnum Venus Plastech UltraMAX VLS-4600 Series - Manual (Page 21)

VLS-4600 Series Fluid Section Manual
Rev. 08/2013 Page | 21
WEEKLY MAINTENANCE CHECKLIST:
PART PROCEDURE
Ai r Filter (“Water Trap”) Drain
Hoses Check for kinks or leaks.
Gauges and Regulators Check for damage and proper operation.
Accumulator Remove and clean inside. Danger: Never attempt to
remove an accumulator until you have relieved
pressure. See
Chapter 6: Accumulator & Filter.
Filter Clean and inspect filter screen for plugging. Note: Clean
the screen weekly and when changing from one
material to another. Use proper screen mesh size
according to the material being used.
Fluid Section Check the oil reservoir and add oil if needed. If necessary,
clean and dry the silencers.
Check the pickup hose
and wand for leaks and damage. Check for packing leaks.
Air Lines Check for leaks, wear and kinks. Replace if necessary.
MONTHLY MAINTENANCE CHECKLIST:
PART PROCEDURE
Ai r Filter (“Water Trap”) Drain.
Hoses Check for kinks or leaks.
Gauges and Regulators Check for damage and proper operation.
Accumulator Remove and clean inside. Danger: Never attempt to
remove an accumulator until you have relieved
pressure. See Chapter
6: Accumulator & Filter.
Filter Clean and inspect filter screen for plugging. Note: Clean
the screen weekly and when changing from one material
to another. Use proper screen mesh size according to
the material being used.
Fluid Section Check the oil reservoir and add oil if needed. If necessary,
clean and dry the silencers. Check the pickup hose and
wand for leaks and damage. Check for packing leaks.
Catalyst Jug Check and clean tubes and filter screens if necessary.
Danger: Fire and explosion hazard. Never allow solvent
or grease to contact any part of the catalyst system.
Air Lines Check for leaks, wear and kinks. Replace if necessary.