beautypg.com

Installation & set-up – Magnum Venus Plastech UltraMAX VHPC-3200 Series User Manual

Page 16

background image

VHPC-3200 Metering Pump Manual

Rev. 05/2012

Page | 16

Installation & Set-up


It is important to check the mounting of the Metering Pump to be sure it is securely
connected to the drive linkage and that it is set to the desired percentage / ratio.

Snug / tighten the Metering pump packing nut approximately 1/8 – 1/4 turn clockwise to
prevent leakage. Repeat this procedure when necessary to prevent material from
leaking. Do not over tighten as this will reduce the life of the packing set and may
cause damage to the pump.