Liquid Controls HAZARDS PRECISION TURBINE FLOWMETERS - Manual (Page 2)

2
TABLE OF CONTENTS
Page
Description
2 Introduction
3 System Requirements
3 —System Information
3 —System Considerations
4 —Owner Responsibility
5 Product Information
6 Installation
6 —Unpacking
6 —Installation Considerations
6 —Drawings
7 —Putting Into Service
7 —Placing Into Operation
8 Use
8 —Gas Leaks
8 —Gas Fires
9 Maintenance
10 Removal & Disposal
Publication Updates and Translation
The most current English versions of all Sponsler publications are available on our website,
www.sponsler.com. It is the responsibility of the Local Distributor to provide the most current version of
Sponsler Manuals, Instructions, and Specification Sheets in the required language of the country, or the
language of the end user to which the products are shipping. If there are questions about the language of
any Sponsler Manuals, Instructions or Specification Sheets, please contact your Local Distributor.
INTRODUCTION
This manual provides details of some of the standard regulatory approvals carried on Sponsler’s
products. There are many approvals that may be applicable to a specific installation or product type. The
owner must ensure that the system into which the product is installed complies with all applicable local
regulations. This manual is designed to accompany the manuals supplied with Sponsler’s components
ordered. Any information relating to ATEX or PED requirements not found in the accompanying manuals
will be found in this manual.
Only trained personnel should install, operate, and maintain Sponsler’s meters, registers, and
accessories