Impulse 5102 - Manual (Page 11)

© Sealevel Systems, Inc. - 9 - ACB-MP.PCI User Manual
Electrical Characteristics
Features
Single port with DB-25M connector
Configurable for RS-232, RS-422, RS-485, RS-530, RS-530A, or V.35
Z85230 Enhanced Serial Communications Controller (ESCC™) supporting
synchronous or asynchronous communications
Programmable electrical interface selection for EIA/TIA-232/530/530A/485 and
ITU V.35
Programmable options for Transmit clock as input or output
Software programmable baud rates
Data rates to 128K bps
X.21 and RS-449 serial interface capability with versatile cabling options
Specifications
Environmental Specifications
Specification Operating Storage
Temperature
Range
0º to 70º C
(32º to 158º F)
-50º to 105º C
(-58º to 221º F)
Humidity Range 10 to 90% R.H.
Non-Condensing
10 to 90% R.H.
Non-Condensing
Power Requirements
+5VDC @ 350mA
Dimensions
L W
4.75” 3.50”
12.07cm 8.90cm
Manufacturing
All Sealevel Systems Printed Circuit boards are built to UL 94V0 rating and are
100% electrically tested. These printed circuit boards are solder mask over bare
copper with either Electroless Nickel Immersion Gold (ENIG) or Hot Air Solder
Leveled (HASL) finish.