Controlled Products Systems Group CVX-1300 User Manual
Page 5
The Cypress CVX-1300 is based on the CVX-1200 series converter. For most legacy converter
functions, the DIP switch settings will be set the same as with the Cypress CVX-1200.
This document provides detailed wiring information and a reference to DIP switch settings for the
converter. Detailed conversion descriptions are provided in chapters organized for each type of
conversion function. i.e. Wiegand to Serial functions will have a chapter, Serial to Strobed will have
a chapter etc. Each chapter is a separate document and is available at
A Diagnostic LED is provided to provide operational status of the converter:
Diagnostic LED OFF - No power
Diagnostic LED Blinking Green - Unit is operating
Diagnostic LED Red - Undefined DIP Switch Setting
Note: Terminals shown for reference.
Connections may or may not be utilized based on converter function.
External connections and product description
Converter CVX-1300
1-D0/CLK Input
2-D1/Data/F2F Input
3-Aux2 LED Out
4-Ground
5-RS232 Input
6-RS232 Output
7-RLY1 N.C.
8-RLY1 Com
9-RLY1 N.O.
10-RLY2 N.C.
11-RLY2 Com
12-RLY2 N.O.
1-D0/CLK Output
2-D1/Data/F2F Output
3-Aux1 LED In
4-Analog In1
5-Analog In2
6-+5 VDC Out
7-RS485 (-)
8-RS485 (+)
1-Ground
2-8 to 16 VDC In
Diagnostic LED
Note: F2F connections support
unsupervised mode