CTI Products CHIB CommandSTAR Lite Host Interface Module - Manual (Page 16)

CHIB Hardware Reference Console Configuration / Mapping
CTI Products, Inc.
68-11662-100
12
9. Console Configuration / Mapping
The CHIB module emulates 5 CommandSTAR Lite I/O boxes. The receiver
status and control signals are mapped to the I/O Box points as shown below.
Typical programming in CSDM Lite is shown in the rightmost two columns. Use
I/O Type H. LEDs are programmed in pairs.
Rx Signal Button/LED Address Relay ID Opto ID Output Input
1 Disable Button 30H 0 1
1 Force Vote Button 30H 1 2
1 Disabled LED 30H 0 1
1 Receive LED 30H 1 1
1 Failed LED 30H 2 2
1 Voted LED 30H 3 2
2 Disable Button 30H 2 3
2 Force Vote Button 30H 3 4
2 Disabled LED 30H 4 3
2 Receive LED 30H 5 3
2 Failed LED 30H 6 4
2 Voted LED 30H 7 4
3 Disable Button 30H 4 5
3 Force Vote Button 30H 5 6
3 Disabled LED 30H 8 5
3 Receive LED 30H 9 5
3 Failed LED 30H 10 6
3 Voted LED 30H 11 6
4 Disable Button 31H 0 7
4 Force Vote Button 31H 1 8
4 Disabled LED 31H 0 7
4 Receive LED 31H 1 7
4 Failed LED 31H 2 8
4 Voted LED 31H 3 8
5 Disable Button 31H 2 9
5 Force Vote Button 31H 3 10
5 Disabled LED 31H 4 9
5 Receive LED 31H 5 9
5 Failed LED 31H 6 10
5 Voted LED 31H 7 10
6 Disable Button 31H 4 11
6 Force Vote Button 31H 5 12
6 Disabled LED 31H 8 11
6 Receive LED 31H 9 11
6 Failed LED 31H 10 12
6 Voted LED 31H 11 12
7 Disable Button 32H 0 13
7 Force Vote Button 32H 1 14
7 Disabled LED 32H 0 13
7 Receive LED 32H 1 13
7 Failed LED 32H 2 14
7 Voted LED 32H 3 14
Programming I/O Box