Comprehensive CSC-7850 - Manual (Page 21)

Configuring the CSC-7850 via the OSD MENU Screens
18
8.1 The Input Screen
Figure 9 and Table 5 define the Input screen.
Figure 9: Input Screen
Table 5: Input Screen Functions
Setting Function Selection/Range Default
Source 1 Select the source 2 Input 1, Input 2, Input 3, Input 4, VGA 1, VGA 2,
HDMI 1, HDMI 2 or USB
Input (1 to 4)
Source Type
Select the source type Component, YC or video (CV) Video
Image Name Shows the file name 3 that is
displayed when the USB port
is connected
Color Format Select the color format Auto, RGB or YUV Auto
Video Standard Select the video standard Auto, NTSC, PAL, PAL-M, PAL-N, NTSC 4.43,
SECAM or PAL-60
Auto
H-Position Set the horizontal position 4 The range changes according to the input mode
V-Position Set the vertical position The range changes according to the input mode
Frequency Adjust the frequency 5 0 to 26 0
Phase Adjust the phase 0 to 31 0
Auto image Assesses the image and improves the quality accordingly, by automatically
adjusting the phase, frequency and position
1 When switching sources, the image fades through black
2 Automatically updated when pressing an input front panel button on the machine
3 Supports JPEG format only, including EXIF data (Exchangeable Image File Format). The JPEG file should not exceed a
resolution of 1920x1200. If the image file is not within the definition, the machine displays the message: “Non EXIF File” or
“Size Too Big”
4 For UXGA and component video inputs
5 For UXGA inputs