Codelocks Upgrade - Audit Trail Kit for CL5010 User Manual
Page 7
7
SET CODE FREE MODE
#
Master Code
•
08
••
Result:
Lock will be continuously unlocked.
CANCEL CODE FREE MODE
#
Master Code
•
09
••
Result:
Lock will revert to normal operation.
CHANGE MASTER CODE
*
#
Master Code
•
10
•
Enter length of Master Code followed
by new Master Code (e.g. 6, 123456)
•
confirm length of Master
Code followed by new Master Code (e.g. 6, 123456)
••
Result:
Master Code now changed to #123456.
Note:
If the length of the Master Code is changed then all
previous User Codes will be deleted.
CANCEL EMERGENCY OPEN MODE
#
Master Code
•
11
••
Result:
The emergency unlocked condition via REM 2 will be
cancelled and the lock will revert to normal operation.
Code accepted
Code rejected
DELETE ALL USER CODES
#
Master Code
•
12
•
12
••
(7 secs)
Result:
All User Codes will be cleared from the memory.
ADD/CHANGE SUB-MASTER CODE
#
Master Code
•
13
•
Sub-Master Code
(e.g. 2468)
••
Result:
A Sub-Master Code #2468 has been entered.
DELETE SUB-MASTER CODE
#
Master Code
•
14
•
14
••
Result:
Sub-Master Code has been deleted.
LOCKED/UNLOCKED STATUS
1. #Master Code
•
15
•
1
••
Result:
Locked - No LED flashing (this is the default setting).
2. #Master Code
•
15
•
2
••
Result:
Locked - Red
•
LED flashing.
Note:
If activated, LEDs will flash continuously every
5 seconds. LEDs will not indicate unlocked mode by key.
•
•
Code(s) valid but suspended
PROGRAM 08
PROGRAM 09
PROGRAM 10
PROGRAM 11
PROGRAM 12
PROGRAM 13
PROGRAM 14
PROGRAM 15