CNB HDS4848DV - Manual (Page 17)

17
STEP BACKWARD Button
Move backward by one frame under Pause. Use this button to
move down when setting the menu.
- Zoom In under PTZ mode.
EJECT Button
It will open or close the backup drive such as CD-RW or DVD
- Display menu to load PTZ presets under PTZ mode.
PTZ Button Changes to the PTZ control mode from the live mode.
ZOOM Button Zooms the current image on the screen.
PIP Button Changes to PIP screen mode from live screen.
FREEZE Button Freeze the current screen.
AUDIO Button Selects a camera for live & playback audio output.
SPOT Button Assigns the SPOT output channel.
OSD Button Turns on/off the OSD display.
LOG Button Checks the system’s log information.
ID Button Selects the DVR system ID. (Remote controller only)
E.REC Button
Pressing the E.REC button stars Emergency Recording Mode of
all camera channels, and displays "!" on the screen. Pressing
the button again will stop E.REC mode.
Status LED Power, HDD, Network, Alarm
1-2. Turning on the System
Connecting the power cord will turn on the power of DVR. It will take approximately 10 to 30 seconds
for the system to be initialized. Once the system is initialized, it will display live screen, and begin to
record video automatically.
Note : To turn off the system, select SHUTDOWN under main menu (MENU > SHUTDOWN) and
unplug the power cord when the shutdown message appears.
Note : When installing the HDD for the first time, the HDD should be formatted first.
“MENU > RECORD > Storage > HDD format”