American Power Conversion 100 VAC - Manual (Page 8)

990-7096 Rev. 2 4
C
HAPTER
3: I
NSTALLATION
Unpacking
APC has taken care to design robust packaging for your product. However, accidents and damage
may occur during shipment.
Inspection
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage. The packaging is
recyclable; save it for reuse or dispose of it properly.
Contents
The shipping package contains the UPS, its front panel bezel (disconnected from the unit),
mounting rails, and a literature kit (containing mounting hardware and product documentation).
Placement
S m a r t - U P S S m a r t - U P S S m a r t - U P S
Install the UPS in a protected area that is free of
excessive dust and has adequate air flow. Do not
operate the UPS where the temperature and
humidity are outside the specified limits.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the warranty.
How to Install Your Smart-UPS
To install the UPS follow these steps:
1. Mount the UPS in the rack.
2. Connect the battery and attach the front panel bezel.
3. Connect power and the equipment to the UPS.
4. Turn on the UPS.
5. Install optional PowerChute® software (sold separately).
This section describes each step in detail.